Switch công nghiệp PoE-30W, 60W, 100W (10 Gigabit Ethernet and PoE)
5 5 (1 đánh giá)Managed industrial Ethernet PoE and PoE+ fiber switch
Supports 1000BASE-X Gigabit fiber and
10/100/1000BASE-T RJ-45 with PoE/PoE+
Multiple configurations, including 6 Port and 10 Port:
1 Fiber + 4 Copper
2 Fiber + 4 Copper
1 Fiber + 8 Copper
2 Fiber + 8 Copper
Supports jumbo frames up to 10,240 bytes
Management via Web, Telnet, SSH and serial interfaces
Supports SNMPv1/v2c/v3 protocols
SNMP management via Omnitron’s NetOutlook® management software, or third-party SNMP management software
Email Event Notification with Simple Mail Transfer Protocol (SMTP)
Heartbeat signal to verify connectivity to the PD
Configurable PoE Power Reset
Supports ST, SC and LC fiber ports or SFP transceivers
Fiber redundancy on models with two fiber ports
Dual Device mode for operating as two separate switches
Directed Switch mode to prevent port flooding
Alarm contacts and sensors
Isolated single or dual DC power for redundancy
Wall, Rack and DIN-rail mountable
Fan-less design for long life and vibration resistant
Industrial (-40 to 75ºC) operating temperature
Free 24/7/365 Technical Support
Hãng sản xuất: Omnitron-systems
Xuất xứ: Mỹ
- Bảo hành: 12 tháng
- Tình trạng : Còn hàng
Liên hệ
Đặt mua: 0904.787.059
- Khách hàng Mai Khánh Toàn - (0966787xxx) đã mua 1 year trước (24/11/2023)
- Khách hàng Mr Tan - (0983376xxx) đã mua 1 year trước (11/10/2023)
- Khách hàng nguyệt - (0932628xxx) đã mua 2 năm trước (05/07/2023)
Thông số kỹ thuật Switch công nghiệp PoE-30W, 60W, 100W (10 Gigabit Ethernet and PoE)
1. Tính năng chính
■ Managed industrial Ethernet PoE and PoE+ fiber switch
■ Supports 1000BASE-X Gigabit fiber and
10/100/1000BASE-T RJ-45 with PoE/PoE+
■ Multiple configurations, including 6 Port and 10 Port:
• 1 Fiber + 4 Copper
• 2 Fiber + 4 Copper
• 1 Fiber + 8 Copper
• 2 Fiber + 8 Copper
■ Supports jumbo frames up to 10,240 bytes
■ Management via Web, Telnet, SSH and serial interfaces
■ Supports SNMPv1/v2c/v3 protocols
■ SNMP management via Omnitron’s NetOutlook® management software, or third-party SNMP management software
■ Email Event Notification with Simple Mail Transfer Protocol (SMTP)
■ Heartbeat signal to verify connectivity to the PD
■ Configurable PoE Power Reset
■ Supports ST, SC and LC fiber ports or SFP transceivers
■ Fiber redundancy on models with two fiber ports
■ Dual Device mode for operating as two separate switches
■ Directed Switch mode to prevent port flooding
■ Alarm contacts and sensors
■ Isolated single or dual DC power for redundancy
■ Wall, Rack and DIN-rail mountable
■ Fan-less design for long life and vibration resistant
■ Industrial (-40 to 75ºC) operating temperature
■ Free 24/7/365 Technical Support
2. các tính năng mở rộng
■ IEEE 802.1Q VLAN tagging and IEEE 802.1ad Q-in-Q Provider Bridge VLAN stacking
■ Port Access Control for enhanced security
■ Broadcast / Multicast / Unicast Storm Prevention
■ DHCP Relay Option 82
■ RFC 4541 Internet Group Management (IGMP) snooping
■ IEEE 802.1ax Link Aggregation Group (LAG) and Link Aggregation Control Protocol (LACP)
■ IEEE 802.1ab Link Layer Discovery Protocol (LLDP)
■ Rate Limiting, Queue prioritization and Class of Service
■ IEC 62439-2 Media Redundancy Protocol (MRP)
■ IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
■ Static MAC configuration and blocking of unknown Unicast/Multicast addresses
■ SNTP / NTP and time of day
■ IEEE 802.1x, RADIUS, TACACS+ and Access Control Lists
■ RFC 5424 Syslog
3. Ứng dụng
Dual Device Mode
For secure applications requiring two separate network domains over fiber runs to the same location and independent connectivity for security and Wi-Fi devices, the GPoE+/Mi can be configured in Dual Device Mode.
The GPoE+/Mi provides separate and independent data traffic paths between the two fiber links and four or eight RJ-45 ports. In the example below, the green lines represent a Security network and the purple lines represent a separate and independent Wi-Fi network.
Directed Switch Mode
In some networks, video cameras broadcast a single multicast video stream to the entire network, and the video stream is received by all of the destinations. This multicast video can cause port flooding on other network devices (including other cameras, printers and workstations). To avoid this, multicast traffic is routed only to ports where the destination devices are connected.
The GPoE+/Mi can be configured to operate in Directed Switch Mode, which directs video traffic only to the uplink fiber port, as shown in the diagram below, preventing the multicast video traffic from flooding other network ports
Industrial Daisy Chain Network Application
RuggedNet PoE fiber switches can be deployed in a simple point-to-point topology, along a fiber daisy chain, or with redundant fiber links. In this industrial manufacturing application example, RuggedNet GPoE+/Mi PoE fiber switches are deployed along an assembly line. Gigabit fiber is distributed from a fiber switch at a network hub location to RuggedNet GPoE+/Mi PoE switches with dual fiber ports that enable a fiber daisy chain with multiple locations. Each RuggedNet GPoE+/Mi provides fiber data connectivity and PoE+ power for IP cameras and Wi-Fi access points at each location
4. Tiêu chuẩn kỹ thuật
Description |
RuggedNet GPoE+/Mi |
|
Standard Compliances |
IEEE 802.3, IEEE 802.3af (15.40 watts), IEEE 802.3at (30 watts) |
|
Environmental |
REACH, RoHS and WEEE |
|
Management |
Web, Telnet, SSHv2, Serial Console, SNMPv1/v2c/v3 |
|
Frame Size |
Up to 10,240 bytes |
|
Port Types |
Copper: 10/100/1000BASE-T (RJ-45) |
|
Cable Types |
Copper: EIA/TIA 568A/B, Cat 5 UTP and higher |
|
DC Power Requirements |
4 RJ-45 Ports: |
8 RJ-45 Ports: |
Dimensions |
W: 1.5” x D: 5.5” x H: 5.5” |
|
Weight |
4 RJ-45 Ports: |
8 RJ-45 Ports: |
Operating Temperature |
-40 to 75°C |
|
Humidity |
5% to 95% (non-condensing) |
|
Altitude |
-100m to 4,000m (operational) |
|
MTBF (hrs) |
4 RJ-45 Ports: |
8 RJ-45 Ports: |
Warranty |
5 year product warranty with 24/7/365 free Technical Support |
Alarm Contacts and Sensors |
|
Alarm Contact (Output) |
2 form C Relays for Normally Open and Normally Closed Operation |
Alarm Sensor (Input) |
2.0ma @ 3.3VDC Closure Detection |
Standards and Compliances* |
|
Safety |
UL 60950-1 |
EMC |
EN 55032/24 |
EMI |
CISPR 32, FCC 47 Part 15 Subpart B Class A |
EMS |
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV |
IP Rating |
IP40 Protection |
Quý khách có nhu cầu tư vấn Switch công nghiệp xin vui lòng liên hệ
CÔNG TY TNHH HỆ THỐNG CÔNG NGHỆ THÔNG TIN COTEL
Địa chỉ: 14C2 Ngõ 521/51, Trương Định, Hoàng Mai, Hà Nội, Việt Nam
Điện thoại: (024) 66637998 | Hotline: 0904787059
Email: info@cotel.vn